The topic of difficult windows is one that I get a lot of comments and emails about.
So, let’s take a look at some common difficult window situations and look at both what to do and also what not to do. If it’s an image that’s a “don’t do that,” I would prefer it not be pinned to pinterest. Thank you.
The other day I received an email about a very common type of difficult window.
A difficult window situation that’s very common is usually found in today’s “great room.”
I mean, it would appear that one just can’t have too many windows stacked on top of each other. Right?
And, on top of that, we are often forced to deal with the ubiquitous arch. Don’t get me wrong. I love arched windows, but in the appropriate proportions and settings. Please refer to this post for more info about that.
Ahhh, yes. And, there’s that quarter round window that has been my nemesis for many years. Remember this living room? If you have a window like that, please check out the link for my ideas, plus those of many readers.
The current home-owner says that the previous owner hung curtains from the top of the lowest windows. I don’t think that’s a good look because it is too bottom-heavy.
The logical solution, as I see it would be to hang draperies above the next grouping of windows; just underneath the big arch.
But… Laurel, what about the quarter circle windows? Won’t that look funny to have curtains?
That’s a very good question. Let’s see?
I think if we cover up about two thirds of the window, it’s really fine. I think the proportion of the curtain is just right, as well.
The drapery panel width isn’t indicated here. However, if the drapes don’t need to close, I would do a double panel. That means two widths of fabric that are 54″ wide. You could maybe get away with a panel and a half, but not a single panel as shown here. (I found these ready-made panels on Overstock)
I also created another version showing a plain fabric that is a similar color to the wall.
That’s actually an image of a Pottery Barn velvet twill curtain. However, it only comes as long as 108″ – nine feet. And, that looks to be 10-11 feet. So, let’s say you’d like to use a ready-made curtain to save money. But, the curtain is too short.
Below is one of my favorite solutions for that problem window situation.
We add a deep contrast hem to extend the length. How long? Well, sometimes if you’re lucky, you’ll have a low window sill. Usually, the hems range from 12″-27″ Or, from about 1/5th – 1/6th the total height of the drape.
A while back I received a similar difficult window from another reader.
The tall super skinny panels give a match-stick-like appearance. I would not do that.
The third option would be to go all the way up, but the sharp angle of the ceiling means the rod would have to come in further and I think it would look cramped and weird.
It balances out the large transoms and creates more drama.
Let’s look at some other difficult windows
Some of these were handled beautifully. And some, not so well, IMO.
While we’re on the topic, let’s stick with more Palladian and arched windows
These are very often troublesome for obvious reasons.
I think that this is beautifully executed.
This is an especially challenging situation. We have a corner and a Palladian window that doesn’t follow the natural line.
The solution is to hang the side drapes and follow that line along the back wall.
Normally, I’d like a little wider panel flanking these doors, but the simple panel seems to understand that it is not the star of the show. Nosiree! Not when you have these exquisite French doors and arched transoms.
The one above is perfect, however. Sorry, original source unknown. If you know whose work this is, please let me know, and I’ll give them the credit.
This is a good example of a rod that logically goes over the arched windows.
No. I would’ve run the rod across like the one above. And please no scary hooky things.
Sorry, but this one gets a “no” from me. I wouldn’t have done any drapes here, unless perhaps it was possible to go above the arch.
And, no truncated rods! I never saw this until a few years ago. It’s so bizarre, IMO. The drapes should look like they can close even if they don’t. And please move the painting over so the drapes aren’t eating it. Thank you.
This is from Markham Roberts’s fabulous room at the Kip’s Bay Showhouse. His window treatment is beyond glorious.
And he used a panel and a half which even if the drapes are not meant to close is the appropriate amount of fabric for this size window and ceiling height. I met Jamie on the Design Bloggers Tour a few years ago. Super nice guy! He was unveiling a line of furniture for Theodore Alexander.
Love what Marisa did here! If you too, love transom windows, click here for one of my favorite posts.
Wonderful treatment in this library. I love the layering of the treatment for light control.
Great solution for a large window with French doors and then a smaller window.
Beautiful living room. Sometimes the crown moulding can be a challenge, but it looks like they got it just right.
I would’ve been fine with a little Roman shade layered over the blinds. But, definitely a “no” to the valances. IMO, they’re too fussy and bright.
This is almost right from Pottery Barn. You can find the cotton basketweave curtains here. I would’ve added on more panel in the corner. It looks a little skimpy.
This bedroom by Tobi Fairley has some difficult corner windows perfectly executed.
super tall windows
That looks pretty perfect to me!
I have a special fondness for Bay Windows which began during my years living in northern California
This is a bay window with a deep sill so the drapes have to be mounted in front.
When we measured for the drapes, we didn’t realize until the valance came down that there was NO PLACE to put our rod. It’s difficult to see here, but the window frame and opening was flush with the ceiling! Fortunately, we had time and the builder created a 4″ soffit for us to hang our drapes on! It looks so much better too!
***Note: Insist on the window treatments coming down if at all possible before measuring.
This post about custom drapery rods and hardware is a good one to check out. There is also information about how drapery rods for bay windows.
Can’t tell you how much I love this!
This is obviously a basement room with tiny little slits for windows.
They put up some silhouette shades and drapes and then created “windows” with art. Brilliant!
windows of different heights
Exquisite room by Patricia McLean for the Atlanta Symphony Showhouse. I’m sure she wanted to shoot the architect. When you look at this image it looks weird, but then below it makes sense because there’s at least one other door with a transom.
I think Patricia did a great job with what she had to work with.
It’s not that the room is an architectural failure. The architecture is full of rich detail, but I wish that the architects would have taken into consideration the fact that we are going to want to put up drapes.
windows too close to the fireplace
I love what Kristi has done here and especially that she has combined drapes and Roman shades. Since the windows on the right are different from the windows on the fireplace wall, this is a viable option. In so doing, it breaks up the sameness and makes the fireplace wall that much more of a focal point.
About 16 years ago I had a client who had built her home and had been in it for about 10 years. I did her living room. There was a lovely fireplace in the living room but the windows flanking it were 1 inch away from the mantel.
Apparently, nobody caught this obvious boo boo.
There was a good three feet on the other side of each window. If the windows were 18″ over the windows would’ve been a good distance from the FIRE and centered.
We did drapes pulled back to the opposite sides and it really helped create the illusion that the windows were not so close.
Soft pretty eating area. Here, I would’ve done drapes with a ROD on the window on the left and then Roman Shades out of the same fabric over the built in area.
This is a woman with nerves of steel (or else some really good prescription drugs) ;] and an AMAZING workroom.
Think about what it took to pull this baby off!
And a Greek Key to boot!
Some of you have asked about radiators.
PS: Please check out the newly updated hot sales.
***In addition*** the holiday shop has been newly updated for 2019!
We will be adding to it all month long.